Type: Button Seesaw Type Thickness: 13.5mm Maximum Rating: DC12V/15A(180W) Handlebar Diameter: o22.2/o25.4
* You may not be able to use till maximum rated value depending on the temperature of the used environment. * When used at large current, the attached wiring will get heated but it's not abnormal. * The maximum electric current value is 15A. It will not change even if you use it at 6V. * You cannot use at 24V. * The rated value current of attached wire connector (red) is 7A. When using it at over 80W, use commercially sold plug receptacle or connect it with soldering. * Use attached rubber spacer if clamping to handle of outer diameter 22.2mm. * Do not over tighten the screw. Since it is made of resin, you will damage the resin if over tightened.
It is a thin type ON/OFF switch, 4-types. It is a slim ON/OFF switch (handlebar clamp type) with a thickness of 13.5mm that can be attached to the body smartly with a luxurious design, yet it is compatible with high power up to the maximum rated DC12V/15A (180 W) while it is a thin body, and it can be used for various electrical components. There are 4-types of switch variations. It can be clamped to both handlebar outer diameter φ22.2/φ25.4.
Points of Attention
* If there may be an instruction manual included, it will be written in Japanese.
Recently viewed products
Ratings & reviews for this product or related products
I bought this for a GSX1400 fan forced drive switch. This car has a 1400cc oil-cooled engine, so the oil temperature rises quickly. Also, the fan has to be driven at a temperature of 120 degrees Celsius to be driven, so my legs always get stuck in traffic jams. I was about to get burned. Therefore, I decided to install a Switch that allows the fan to be driven manually at will. I did. I won't bore you with the installation, because I think you'll understand how it works if you have Testers. For Review. First of all, you don't have to take your hands off the Handlebar to install the Handlebar. I was looking for a Switch for Mounting. Moreover, I am looking for a Switch that does not come out of the feeling of retrofitting, and I am looking for a Switch that comes out of the OEM feeling. I did. This is a Switch that most Switches stick to, and conclude with a Bolt, but this product is a Because of the handlebar-mounted switch and the thinness of the switch We matched to this Custom statue. In order to make a 13mm width gap, the position of the clutch master should be slightly adjusted. I moved it to the inside of the Handlebar. So I put it between the Handlebar Switch and the Clutch master. Harness is extended from the Handlebar Switch, but it is not. I was able to dodge it well due to the structure of the Switch. It is only one Bolt, but it is possible to install it because the Bolt goes around all the way because of the Rubber. Be careful with the tightness; if the Switch is pressed and the Body doesn't move, it will tighten further. There is no need. Next up is Wiring, which has a longer Harness available from SwitchBody. So it could be handled smoothly. Since there is no polarity for a logical switch, the Hahne SCHOLAR Knife is the same color Covered the base of the Switch with a tube for Harness protection. If you use Shrinkable Tube etc. to make it hard to get Rose for Wiring, it will be easier. I think it is possible to do wiring. Although there are some people who often use Bullet Terminal for wiring, I think it is possible to use Coupler or It is much easier to connect the wires with connectors to prevent poor contact and to remove and install the connectors. This time I used the 110" 2-pole coupler. Next, it is easy to operate the Switch because it has a good click feeling. It's easy to understand the current state of the device because the ON and OFF buttons are different. However, the LED is not installed, so the visibility at night is not as good as it used to be. Because of the plating, it will appear to be reflected by the vehicle's metered light and streetlights. The durability of the problem, but it's unknown as it's only been a short time since it was installed, but the simple construction of the Switch It is unlikely to break because of the If you want to use it as a Switch to drive Others' electrical components, you can use it as a Switch's capacity The maximum current capacity of the headlight switchetc. Headlight switchetc.Especially for use in electrical components with current flowing in the Headlight switchetc. It is recommended to use Relay in combination with I can highly recommend this product. However, it's a bit pricey for a Switch, so with Sale and use of points you own etc. I thought it was a good idea to buy it.View Detail
I bought this product after I got lost in purchasing Switch for Fog Lamp. ON / It's just a switch that just pushes OFF. It works properly even in Large rain in July and Waterproof quality is guaranteed feeling. It is good that the thickness is thin and no trouble with installation Space.View Detail
เป็นสวิทเปิดปิดไฟที่สวยงาม คุณภาพดีมากสายไฟขนาดใหญ่อย่างดี ขนาดเล็กกระทัดรัดติดตั้งง่ายเพราะมีอุปกรณ์มาให้พร้อมเลย(Google Translation)A switch off the light beautifully. Very good quality wiring a large well. Small, compactIt is easy to install and come with me.View Detail
Material : It was Plastic, is not it good to have a bit more texture! It is easy to understand if there is a display of + - - - - - - - - - - - - -View Detail
【What made you decide the purchase?】 Required I found it when I search for an item that is not big enough with OnOff switch. 【How was it actually used?】 Required ON / It has sense of being Snap of OFF, easy to understand. 【Was it difficult to install? (Hard parts case)】 Any I struggled to pinch the Rubber. Please note that Screw may not be rotated in a narrow place 【Please tell me the point of installation and hang (in the case of Hard parts)】 Any There is Screw under the back of Body, and it may be hard for Harness of Handlebar etc.. 【Fit feeling and height when wearing - Please tell me the weight etc (Apparel case) 】Any [Is there anything I was disappointed about?] Required The texture is not bad, but it seems easy to break. 【Hope for Manufacturer - Please let me know if there are any improvement points】 Required A little expensive. You may make more Small. 【Have you compared items?】 Required None [Others] AnyView Detail
* The BEST and MUST store to find Japanese parts. * Register now for amazing deals and other special offers! *Over 800,000 listed items. It's hard NOT to find your parts.
SIGN IN TO WEBIKE JAPAN
Please enter email at least 6 characters.
Please enter a valid email address.
Email is already in use.
Your account has been banned.
Email address and/or password is not match.
Authentication with facebook fail.Please try again.
Please select How did you get to know about Webike Japan?
OR
YOUR ACCOUNT HAS BEEN CREATED!
Congratulations! Your new account has been successfully created! You can now take advantage of member privileges to enhance your online
shopping experience with us. If you have ANY questions about the
operation of this online shop, please email Webike through CONTACT US.
A confirmation has been sent to the provided email address. If you
have not received it within the hour, please contact us.
Get on your grid by register your motorcycle! About our "Mybike" service
"Easier to Search Items" It helps you to search items to fit for your motorcycle!
"Get Much Valuable Information" It helps you to get special deals, newly listed items and closeouts about your motorcycle!
"Easy to Register" It requires only your motorcycle manufacturer, model name and model year!