*This product is designed for iPhone7 only. *Because this product is made of aluminum, radio waves will be blocked from the back of the main body. There is a possibility that the performance of receiving radio waves is slightly inferior. *This product is not designed to completely protect your iPhone from shocks. GILD Design is not responsible for any damage to the iPhone, malfunction, loss, or loss of data. *This product is designed to prevent the iPhone from contacting with the case by using shock-absorbing resin, but it is not designed to completely protect the iPhone from scratches. *GILD Design is not responsible for any damage to the iPhone caused by installing this product. *The specifications, appearance, and included products of the product are subject to change without notice. *We recommend the thickness of the film to be less than 0.2mm. *Some types of aftermarket film may cause problems such as lifting of the film. *It may be difficult to receive the signal in the place where the signal condition is not good. If you are receiving a normal signal, there is no problem. *Due to the characteristics of the anodizing process, it is difficult to finish the same color for each lot. We try to keep the same color as much as possible, but due to the anodizing process, the color may vary from lot to lot. *Because this product is anodized, the contact point where the electric current passes through is not colored. There are two points on the inside of the case that are not colored, but it is not a defect in processing. *Although we have made every effort to make the product photos as close as possible to the actual color of the product, you may notice a change in color depending on your computer monitor, color settings, indoor lighting, sunlight, and other factors.
This is a machined aluminum case for the iPhone7 based on the concept of "protecting your smartphone".
This product is the "Matte RED Edition" that goes well with the new (PRODUCT) RED color of iPhone7 and iPhone7Plus. The matte red edition is made of a case machined from solid duralumin, blasted, and then anodized to a red color. The included bolt is also red and is a special model made for (PRODUCT) RED.
Based on the concept of "Serious protection for smartphones" this special model features an aluminum case machined from solid high-strength duralumin, a material used in aircraft and automotive parts, with the surface finely engraved with a special laser marker to bring out the image.
The protrusion of the four corners of the bumper is not a mere visual design, but is designed as "necessary thickness" to absorb the impact from the four corners when the product is dropped. These four corners play a major role in protecting your smartphone.
The fixing bolts are highly durable Hexaro Buhler bolts. Silicon sheet is made of special elastomer which is the best for shock absorption. This sheet is used to protect the smartphone body from strong impacts by making it a floating mount.
The surface is treated with an anodic oxide film (anodized) to form a hard film for strength and durability. Lightweight and highly rigid case precisely machined from solid duralumin to protect the iPhone7 from external shocks. We have completed many prototypes to make it easy to hold and comfortable to wear on iPhone7 and iPhone7Plus. The lightning cable, volume buttons, and all other parts are designed so as not to affect the operability of the device.
A rubber O-ring is included to prevent the bolt from loosening. Attaching it together with the screw will eliminate looseness.(See image 6)
IPhone 7 and 7Plus cases also come with a strap hole. A strap can be attached to the bottom left of the front so it won't get in the way during calls. You can put it in your pocket smoothly.(See image 7)
Color Bolt Set (model number: GI-305) sold separately has the same bolt size and can be used for iPhone SE, iPhone7/7plus cases.(See image 8)
The cradle (Apple stock Lightning USB cable compatible) is also compatible with iPhone 7 and 7Plus. Can be used without removing the case.(See image 9)
Difference between matte red and regular color [Mud Red] The normal color red is cut, cleaned, anodized, but the matte red is cut, blasted, cleaned, chemically polished, and anodized. The color of the iPhone 7 and 7Plus is the perfect match for the "(PRODUCT) RED" color lineup. (Not exactly the same surface treatment as the iPhone7, 7Plus color lineup " (PRODUCT) RED")
[Red (standard product)] Anodic oxidation treatment is applied to the surface of aluminum. By creating a strong film on the surface, the surface becomes hard and scratch-resistant.In addition, it does not show fingerprints and is stain resistant.
Recently viewed products
Ratings & reviews for this product or related products
* The BEST and MUST store to find Japanese parts. * Register now for amazing deals and other special offers! *Over 800,000 listed items. It's hard NOT to find your parts.
SIGN IN TO WEBIKE JAPAN
Please enter email at least 6 characters.
Please enter a valid email address.
Email is already in use.
Your account has been banned.
Email address and/or password is not match.
Authentication with facebook fail.Please try again.
Please select How did you get to know about Webike Japan?
OR
YOUR ACCOUNT HAS BEEN CREATED!
Congratulations! Your new account has been successfully created! You can now take advantage of member privileges to enhance your online
shopping experience with us. If you have ANY questions about the
operation of this online shop, please email Webike through CONTACT US.
A confirmation has been sent to the provided email address. If you
have not received it within the hour, please contact us.
Get on your grid by register your motorcycle! About our "Mybike" service
"Easier to Search Items" It helps you to search items to fit for your motorcycle!
"Get Much Valuable Information" It helps you to get special deals, newly listed items and closeouts about your motorcycle!
"Easy to Register" It requires only your motorcycle manufacturer, model name and model year!