I bought a 900RS cafe and ran about 1000km OEMHandlebar felt wide to me and I had a stiff shoulder symptom.:I saw that many people were replacing the switch with a set, and I bought it because it has the switch mounting position hole and I thought I could improve the position.
I haven't had a chance to test ride it, but it looks 5-6cm shorter than the OEM and has a comfortable posture.
When replacing the handlebar, be careful to avoid leakage of brake fluid and to protect the handlebar with a toweletc. 。
When replacing the clutch wire, prepare a long piece of string. It will be easy and prevent scratches.
The mobile holderUSB power supply can be installed and the distance between the holder and the YOSHIMURAScreen is about 1 cm, which is a nice touch.
4,633.77 ~ INR (8,076 JPY)
Delivery Information
-
Please select product form first.
Product detail
Stock ratio: 30mm up / 30mm back
Handlebar width: 60mm minus
Components: 3cm long clutch cable, spacer ring
[handlebar size]
・Total height: 80mm
・Total width: 700mm
・Effective width of the holder mounting part: 130mm
・Pullback size: 140mm
・Insertion angle: 30 degrees
・Forward leaning angle: 90 degrees
**Images may contain other colors.
*Side caps for inner diameter Φ18mm are required separately.
*You need to apply for the structural change because of the change of the width..
.
Conti Type 2 Handle Kit and CAFE are available.
3cm long clutch cable with spacer ring included.
The brake hose and throttle cable can be installed without changing.
The switch hole is already machined.
Hurricane handlebar brace size S will fit.
The handlebar brace for Z900RS (HBK695B / C) was designed to fit the SS size, but we found that the S size is easier to use when installing the phone holder on the extra thick type, so we recommend the S size.
Points of Attention
* If there may be an instruction manual included, it will be written in Japanese.
