[Smartphone mounts] [Specifications] For motorcycles: Handlebar Mount [Compatible] Handlebar Size: 22mm [Set components] ・Dual click system x 1 ・Adapter for devices x 2 ・Silicon for adjustment x 1
*Please use a fall protection device for your mobile device. *We are not responsible for any compensation or damages caused by dropped mobile devices. *There may be changes in product specifications due to the manufacturer's reasons. *Paste the double-sided tape to the mobile phone side, but please take measures to prevent the mobile phone from falling by using a strap or the like, in case the phone falls due to differences in adhesion conditions and environments. *We cannot compensate for the loss of your device or data caused by dropping the device, so please be aware of this before purchasing.
■Product Introduction The British brand Oxford's Clicker became an instant hit when it was launched worldwide and became the best partner for motorcyclists and cyclists. The dual click system allows the mobile device to be placed either vertically or horizontally. You can choose the method of installation according to the use of the day. The Clicker is small and does not take up much space. The internal structure has a fail-safe system that prevents the handset from falling even if the spring of the internal lock bar malfunctions. This is a sign of the Oxford brand's meticulous design for reliability.
■Product Features Developed and manufactured by a world renowned brand with a world standard reliable design. Simple and unobtrusive mount to match any vehicle design. With 7 optional mounts, it is highly versatile and can be used in any situation. It also supports the installation of action cameras such as GoPro. The adapter to attach to the phone (case) is a small and flat design. Simple, easy, tough, lightweight and cost effective, the perfect portable device mount. The concept of attaching the adapter to the main body of the mobile device or case allows for a variety of mounting methods! Two-way clickable installation. Can hold your phone in either landscape or portrait orientation! OX850 (Motorcycle) Handlebar Mount Specially Designed for Motorcycles The hinge type clamp is designed for handlebar size 22mm and locks securely with an M5 bolt. Secure your phone with the strong 3M mount.
[Advice on surfaces to be adhered to] ・Before applying the double-sided tape, be sure to wipe off any oil or dirt from the adhesive surface with a degreasing solvent. ・Please do not touch the surface of the tape with your fingers. ・Please keep the temperature above 15 degrees Celsius. ・After applying the tape, hold it down for a few minutes. ・It is not suitable in the case that the installation surface is uneven or there are bubbles. ・Please do not use the product for 24 hours after the tape is applied. ・Once the tape is removed, it cannot be reused. ・When storing the product, avoid leaving it outdoors for long periods of time and avoid high temperature and high humidity environments as much as possible.
Recently viewed products
Ratings & reviews for this product or related products
What made you decide to buy? I tried to use the RAM MOUNT XGrip that I use on the GROM with the ZX-6R, but unlike the GROM, the ZX-6R has a forward riding posture, so I felt uncomfortable with the cell phone in front of me while riding, and I thought it was hard to see the meter. I thought it was difficult to see the meter (I installed it on the KIJIMA Handlebar Mount Bracket). I bought an Oxford clicker and installed it.
How was your experience with it? From the moment I saw the product introduction video of Oxford:Clicker on Webic. "This is it for my ZX-6R!" I thought it was a good idea...but it was a great decision to buy it. Attach the included adapter for the device to the phone case. After confirming the position to stick, degrease it. The adapter is a strong 3M specification, but it is said that the fall prevention measure is necessary because there is a case that it comes off and falls by the difference of the adhesion condition and the adhesion environment etc. Stick the adapter to the mobile phone case and refrain from using it for 24 hours to make it stick firmly. After that, I attached the dual click system to the Kijima handlebar mount stay using the included silicon for adjustment, checked the carrying position and angle, and then tightened the system. It is important to have the position where you can easily insert and remove the key and the angle where you can watch the navigation without shifting your eyes. By the way, it's also good that you can easily change the cell phone to vertical or horizontal orientation! Oxford:The clicker is more refreshing than the RAM MOUNT XGrip, and the meter is easy to read. Also, since 7 kinds of OptionMount are prepared including the mount of ActionCamera, it seems to be able to play an active part in every scene with high universality.View Detail
Was the one you received as per Image? The thing is well made! It is easy to install and to clamp. Two Adapters of Universal to attach to Smartphone Case side were included. You can use it as a spare, or if you have trouble and want to remove it.
How was your experience with it? I'm not sure if it's because I'm not used to it yet, but I haven't been able to remove the Ka Chica Chi as well as I thought I would. I wonder if I'll ever get there...
[Points to note] The part that clamps the Handlebar is a little thicker to ensure minimum strength. The size of the handlebar on the PCX125 was not a problem, but it did not have clearance and could not be installed. For the PCX125 I purchased an additional Multi Mount Bar. https://www.webike.net/sd/23121609/
The VFR800X could not be fitted because the diameter of the Handlebar did not match the VFR800X. It is necessary to purchase the Mount bar of Type that extends from Mirror etc. separately. https://www.webike.net/sd/23453838/
How did it compare to other products? As for the type of phone mount that can be easily detached with the Adapter on the phone side, MotoBundle of SP Conecto and Quad Lock were candidates. If there was Case etc. which conformed to my smartphone which I am using now, I probably made it that way, but because unfortunately there was no Case of Expos for Rear, I chose comparatively cheap Universal-like Clicker.
Wireless charging type Smartphones have been increasing recently. The part where Universal's Adapter is attached may interfere with Wireless charging. My phone is exactly like that, but it may be a bit inconvenient for daily use, as you won't be able to use fingerprint authentication with the Case on. View Detail
Things are very nice It can be installed by anyone because it only requires one screw and adhesive tape. I used it for about 400 km on Touring, and it was fine at that time. The phone never fell off.
I was satisfied. I don't know if it was originally 4 screws that came loose due to vibration or not, but one screw was missing. My Motorcycle has a single cylinder and a lot of vibration! Maybe that's why it came off, but I'm a little disappointed.
If you have a single cylinder, off-road car, or a hardened foot, I recommend that you start with Rose and apply Screw lock.
I'd give it a perfect score if it wasn't for the fact that Screw went pointy.View Detail
When I couldn't fix the Handlebar completely, it broke when I tightened it up. It's better to prepare for your own rubber tuber etc.! It's easy to get stuck in and crack because the fixation points are made of resin! I've managed to take it apart and get it to work, but it's very easy to use!View Detail
I bought this for the installation of a dedicated Navigation device, not for fixing the phone. As for the Handlebar side installation, there is no problem at all. Attachment installation with Strong Double-sided Tape on the body as described in the product description is also a little uneasy, but trusting the adhesion power of Tape, it is glued to the flat part of the BodyReverse side. The problem is that the Bracket and the Body can be fixed by One-touch, but the rattling is large when NavigationBody is installed. There is no rattling in the plane direction, but there is a lot of rattling in the depth direction. I installed it on BMW F 650CS, but because the engine is big single, the vibration around the handlebar is large, and I am worried about how this rattling will affect. Because I have not gone to touring after installing it yet, I cannot tell the situation which was used in reality, but I think that it would be better to use such as a thin Elastic band for auxiliary fixation. The product itself can be attached to the Refreshing and the price is not too expensive, so it may be good for motorcycles with less vibration. I don't feel like using this product to fix a large mobile phone filled with expensive personal information and memories.View Detail
* The BEST and MUST store to find Japanese parts. * Register now for amazing deals and other special offers! *Over 800,000 listed items. It's hard NOT to find your parts.
SIGN IN TO WEBIKE JAPAN
Please enter email at least 6 characters.
Please enter a valid email address.
Email is already in use.
Your account has been banned.
Email address and/or password is not match.
Authentication with facebook fail.Please try again.
Please select How did you get to know about Webike Japan?
OR
YOUR ACCOUNT HAS BEEN CREATED!
Congratulations! Your new account has been successfully created! You can now take advantage of member privileges to enhance your online
shopping experience with us. If you have ANY questions about the
operation of this online shop, please email Webike through CONTACT US.
A confirmation has been sent to the provided email address. If you
have not received it within the hour, please contact us.
Get on your grid by register your motorcycle! About our "Mybike" service
"Easier to Search Items" It helps you to search items to fit for your motorcycle!
"Get Much Valuable Information" It helps you to get special deals, newly listed items and closeouts about your motorcycle!
"Easy to Register" It requires only your motorcycle manufacturer, model name and model year!