Riding position becomes much easier.
A necessity for short hands and short stature? I've heard.
I would even go so far as to say that it is a good idea.
The exchange is made when the handlebar is full of wiring.
Please do it together.
It will save you from Large weirdness later.
- Sale
- Instock
3,414.93 INR (6,085 JPY) 4,826.36 INR Save 29%
Delivery Information
In Stock, Ships within 24 hours.
Estimated arrival date around
FITMENT
-
REBEL 500
17 2BL-PC60
-
REBEL 250
17 2BK-MC49
-
REBEL 250S
17 2BK-MC49
-
Rebel300
Product detail
[Size*] W: 710 H: 100 R: 200 L: 130
[Handle diameter] 1 inch (25.4mm)
*W (Overall width) H (Height) R (Amount of pullback) L (Clamp section straight) Unit (mm)
**This product is approximately 65mm back and 3mm lower in height than the stock handle.
*Overall width is -5mm at the end of the stock lever.(Full width: ±20mm / height: ±40mm) No structural changes are required.
*This product does not require any changes to the hoses / harnesses / wires, but if you are concerned, please change the brake hoses to an appropriate length.Adjust the tension of the axle wire due to the changes in handling.
*The thickness of the paint on this product may vary.There may be a dullness when turning to the axle side.In this case, it is necessary to adjust the throttle sleeve side of the handlebar by shaving with a file.
*The punch marks on this product are for reference only.Please adjust the position of the handlebar to your liking.
*The holes in the switch box of this product may be slightly out of alignment.In this case, it is necessary to widen the hole.If you are a person who is finicky about bolt-on installation, or if you are nervous about the labor cost and process, it is recommended that you consult with your HONDA Dream shop beforehand.
*There may be changes in product specifications due to the manufacturer's reasons..
Compared to the stock handlebar parts, the new one for Rebel 250 / Rebel 500 which has been moved back about 65mm in front and up 10mm to make it easier to ride with a new color "matte black (no gloss)" has appeared!
The matte black (no gloss) color fits the gear and heartbeat of the REBEL and emphasizes its originality!Stock wires and harnesses can be used as it is.
Points of Attention
* If there may be an instruction manual included, it will be written in Japanese.