Perfectly sized seal that where necessary for me to purchase when piecing together parts for my engine maintenance

About quality and texture - The OSH-11 oil seal from K-Pit is made up from hard plastic for the outer and soft rubber for the inner, the quality from the overall fit and finish is perfect.About the feeling of use - Perfectly sized seal that where necessary for me to purchase when piecing together parts for JB03 engine maintenance as the original seal was leaking on the left hand engine crankcase.Products to buy together - A key product to purchase when performing maintenance on the engine is new O-Rings for the timing and crank covers as they tend to also leak over time.Difficulty of installation - The installation of OHS-11 oil seal is an intermediate task that took 1.0 hour to complete. Mechanical aptitude and the use of basic hand tools is what I used to access the oil seal, screw a couple of self tapping screws into the seal and pull the seal out with pliers. The K-Pit oil seal was pressed into the crankcase with a hammer and socket.Cost performance and comparison with other products - I find the cost of all the products K-Pit to great value when compared to what most other companies sell their products for and the OHS-11 oil seal is no different.About shipping and packaging - With there being no cost difference between sea freight and EMS for the OHS-11 oil seal, I chose EMS for an earlier arrive date. The part was extremely well protected while being covered in bubble wrap and surrounded with air pillows in a sturdy cardboard box.Any concerns, cautions, or advice when purchasing - Webike Japan is the first place I look to for all my motorcycle needs. From service parts to performance products and even motorcycle gear and apparel, Webike always seem to satisfy my needs in regards to availability and pricing.View Detail

About quality and texture, I can confirm that the quality is great and that the material used is NBR (nitrile butadiene rubber) which is a synthetic rubber resistant to fuel and oil. About the feeling of use, This repair oil seal is of the same size as the genuine part, fits as intended and zero oil leaks as designed. Products to buy together, To lessen the likelihood of oil leaks from this area in the future, the gear shifter spindle oil seal would be ideal to also add to your cart. Difficulty of installation, I can say the fitment of the oil seal for my installation was average due to the removal of the sprocket cover, chain and front sprocket to allow for removal of the original Honda part to be discarded. Cost performance and comparison with other products, The pricing of the product is great. You receive an oil seal made from a quality material that is durable for it's environment and the best value available when compared to others. About shipping and packaging, My order was shipped within 24 hours of the product being in stock and I received a few emails advising me of the status up until the order was dispatched. The order arrived within the estimated date range and was extremely well packaged. I found the link supplied to track my order very useful while I was waiting for the order to land in the country. Any concerns, cautions, or advice when purchasing, I have no concerns or cautions when purchasing from Webike. I cannot recommend Webike enough for the majority of your biking needs. They not only sell aftermarket parts and bike gear but also OEM parts for your repairs and servicing needs.View Detail

About quality and texture - The OSH-08 oil seal from K-Pit is made up from hard plastic for the outer and soft rubber for the inner, the quality from the overall fit and finish is perfect. About the feeling of use - Perfectly sized seal that where necessary for me to purchase when piecing together parts for my engine maintenance as the original seal were leaking from behind the drive sprocket on the left hand engine crankcase. Products to buy together - A key product to purchase when performing maintenance on the engine is new O-Rings for the timing and crank covers as they tend to also leak over time. Difficulty of installation - The installation of OHS-08 oil seal is an intermediate task that took 1.0 hour to complete. Mechanical aptitude and the use of basic hand tools is what I used to access the oil seal, screw a couple of self tapping screws into the seal and pull the seal out with pliers. The K-Pit oil seal was pressed into the crankcase with a socket and hammer. Cost performance and comparison with other products - I find the cost of all the products K-Pit to great value when compared to what most other companies sell their products for and the OHS-08 oil seal is no different. About shipping and packaging - With there being no cost difference between sea freight and EMS for the OHS-08 oil seal, I chose EMS for an earlier arrive date. The part was extremely well protected while being covered in bubble wrap and surrounded with air pillows in a sturdy cardboard box. Any concerns, cautions, or advice when purchasing - Webike Japan is the first place I look to for all my motorcycle needs. From service parts to performance products and even motorcycle gear and apparel, Webike always seem to satisfy my needs in regards to availability and pricing.View Detail

About quality and texture, I can confirm that the quality is great and that the material used is NBR (nitrile butadiene rubber) which is a synthetic rubber resistant to fuel and oil. About the feeling of use, This repair oil seal is of the same size as the genuine part, fits as intended and zero oil leaks as designed. Products to buy together, To lessen the likelihood of oil leaks in the future from excessive flex in the gear shifter spindle it would be ideal to add a spindle holder to your cart to support the gear shifter spindle. Difficulty of installation, I can say the fitment of the oil seal for my installation was average due to the removal of the gear shifter to allow for removal of the original Honda parts to be discarded . Cost performance and comparison with other products, The pricing of the product is great. You receive a oil seal made from a quality material that is durable for it's environment and the best value available when compared to others. About shipping and packaging, My order was shipped within 24 hours of the product being in stock and I received a few emails advising me of the status up until the order was dispatched. The order arrived within the estimated date range and was extremely well packaged. I found the link supplied to track my order very useful while I was waiting for the order to land in the country. Any concerns, cautions, or advice when purchasing, I have no concerns or cautions when purchasing from Webike. I cannot recommend Webike enough for the majority of your biking needs. They not only sell aftermarket parts and bike gear but also OEM parts for your repairs and servicing needs. View Detail

About quality and texture: I am happy with the quality of the counter shaft oil seal from K-Pit, the outer diameter of the oil seal is a hard plastic while the inner diameter of the oil seal is a soft rubber.About the feeling of use: Over time an oil leak developed on the lower surface of the engine and this counter shaft oil seal resolved that problem.Products to buy together: The gear shift spindle oil seal from K-Pit would also be desirable to purchase along side this counter shaft oil seal as they are ideal to replace together when reassembling the engine.Difficulty of installation: The process to install takes about 30 minutes, remove the front sprocket cover and front sprocket and then pry out the old oil seal. Position the new oil seal and press it into the case. Not difficult to do.Cost performance and comparison with other products: Good costing as you are getting a quality part from K-Pit and it was in stock and ready to ship unlike the Honda oil seal but the pricing between the brands is almost identical.About shipping and packaging: Sea freight was my preferred method of shipping due to the lower cost but currently this service is unavailable from Japan Post, EMS is much faster which is nice. Webike kept me updated on the status of my order up to when it shipped. The parcel arrived within the expected date range and was well packaged with no chance of the part being damaged.Any concerns, cautions, or advice when purchasing: K-Pit offer many replacement oil seals for the Grom that can be viewed in the Kitaco engine tuning and maintenance parts catalog.View Detail

About quality and texture - The front fender (monster style) from Tyga Performance is made from 100% carbon fibre with a clear gloss coating and the quality from the overall fit and finish is perfect.About the feeling of use - So light and glossy, this front fender is now my favourite designed one of the lot. purely a cosmetic addition but for me does wonders improving the looks over the factory designed and finished front fender.Products to buy together - The Honda Grom is an inexpensive motorcycle with a lot of low quality parts from the factory, so the purchasing of other high quality parts like this front fender from Tyga Performance would be perfect. More carbon fibre to replace other factory matte black plastic parts and billet aluminium to replace factory cast aluminium or pressed steel parts is what I would recommend.Difficulty of installation - The installation of the front fender is a simple task that took 0.5 hour to complete. Some slight mechanical aptitude and the use of basic hand tools is what is required to mount the front fender to the lower fork legs.Cost performance and comparison with other products - I find the cost of all the products Tyga Performance sell to be higher then what most other companies sell their products for and the front fender is no different, but this is due to the high quality materials used and the consistent high quality finish of their products.About shipping and packaging - With there being a significant cost difference between sea freight and EMS for the front fender, I chose sea freight so I use the saved money to purchase additional carbon fibre parts. The part was extremely well protected while being covered in bubble wrap and surrounded with air pillows in a sturdy cardboard box.Any concerns, cautions, or advice when purchasing - Webike Japan is the first place I look to for all my motorcycle needs. From service parts to performance products and even motorcycle gear and apparel, Webike always seem to satisfy my needs in regards to availability and pricing.View Detail

About quality and texture - The conversion harness from Kijima are made up from wire, bullet connectors and special honda connectors, the quality from the overall fit and finish is perfect.About the feeling of use - This is a fantastic option to allow an easy conversion from the original blinkers to some aftermarket LED blinkers. Design to be used on the front blinkers only, without the need to modify the original wiring when installing aftermarket blinkers.Products to buy together - A suggested product to purchase with the conversion harness for your aftermarket LED blinkers would be a LED flasher relay, the Grom uses a 12 volt 2 pin.Difficulty of installation - The installation of each conversion harness is a simple task that took 0.1 of an hour to complete. Some mechanical aptitude and the use of basic hand tools is what is required to access the original wiring harness which is located behind the headlight.Cost performance and comparison with other products - I find the cost of all the products Kijima sell to be great value when compared to what most other companies sell their products for and the conversion harness are no different.About shipping and packaging - With there being no cost difference between sea freight and EMS for the conversion harness, I chose EMS for an earlier arrive date. The part was extremely well protected while being covered in bubble wrap and surrounded with air pillows in a sturdy cardboard box.Any concerns, cautions, or advice when purchasing - Webike Japan is the first place I look to for all my motorcycle needs. From service parts to performance products and even motorcycle gear and apparel, Webike always seem to satisfy my needs in regards to availability and pricing.View Detail

About quality and texture - The 6x10 pan screw from Honda ia made from stainless steel, the quality from the overall fit and finish is perfect.About the feeling of use - During removal of the original front fender and fitment of an aftermarket front fender, new shorter fasteners were required for installation of the thinner wall material front fender.Products to buy together - Key products to purchase when removing components for maintenance as a bike ages are replacement fasteners, all genuine Honda parts are available here on Webike for the Honda Grom.Difficulty of installation - The installation of the pan screw is an simple task that took 0.1 of an hour to complete. Common sense and the use of basic hand tools is all that is required to secure the front fender to the lower fork leg using the pan screw.Cost performance and comparison with other products - I find the cost of all the products Honda sell to be very reasonable when compared to what some of the other companies sell their products for and the 6x10 pan screw is no different. About shipping and packaging - With there being no cost difference between sea freight and EMS for the 6x10 pan screw, I chose EMS for an earlier arrive date. The part was extremely well protected while being covered in bubble wrap and surrounded with air pillows in a sturdy cardboard box.Any concerns, cautions, or advice when purchasing - Webike Japan is the first place I look to for all my motorcycle needs. From service parts to performance products and even motorcycle gear and apparel, Webike always seem to satisfy my needs in regards to availability and pricing.View Detail

Quality and Texture:The Endurance race seat features a plastic seat base paired with a single sheet of synthetic material for the seat cover. The overall fit and finish are flawless, reflecting the high-quality standards Kitaco is known for.Feeling of Use:The seat appears to use the same seat base and seat cover as the original seat but with a much nicer shaped seat foam which leads to a more comfortable ride.Products to Buy Together:If you’re aiming to further enhance comfort, consider pairing the race seat with a set of Doctor Grips by Kijima. These grips are incredibly soft and go a long way toward reducing rider fatigue.Difficulty of Installation:Installation is very straightforward, taking just about 6 minutes (0.1 hour). No tools are needed—just common sense and your hands to hook the seat under the forward frame tab and snap it into the rear latch.Cost Performance and Comparison:Endurance usually offers great value, and this is also the case with the race seat.The price can easily be justified with comfort being the main reason. It must be closed to the cheapest option, yeat still delivers.Shipping and Packaging:Due to a notable cost difference between EMS and sea freight, I chose sea freight to save money for other parts. Despite the longer wait, the seat arrived extremely well-protected—wrapped in bubble wrap, cushioned with air pillows, and shipped in a sturdy cardboard box.Concerns, Cautions, and Advice:As always, Webike Japan remains my first stop for motorcycle parts. Whether it's service items, performance upgrades, or riding gear, they consistently meet my expectations in terms of availability, pricing, and customer satisfaction.View Detail

About quality and texture - The front master cylinder diaphragm plate from Honda is made using plastic, the quality from the overall fit and finish is perfect. About the feeling of use - One of the parts that deteriorates over time but is cheap and easy to replace when performing your brake fluid servicing. Products to buy together - Key products to purchase when carrying out servicing on my motorcycle would be crush washers, gaskets, spark plugs and the like as these products are cheap and convenient to have on hand. Difficulty of installation - The installation of the front master cylinder diaphragm plate is a simple task that took 0.1 of an hour to complete. Common sense and the use of basic hand tools is what is required to place the diaphragm plate on top of the master cylinder. Cost performance and comparison with other products - I find the cost of all the products Honda sell to be very reasonable when compared to what some of the other companies sell their products for and the front master cylinder diaphragm plate is no different. About shipping and packaging - With there being no cost difference between sea freight and EMS for the front master cylinder diaphragm plate, I chose EMS for an earlier arrive date. The part was extremely well protected while being covered in bubble wrap and surrounded with air pillows in a sturdy cardboard box. Any concerns, cautions, or advice when purchasing - Webike Japan is the first place I look to for all my motorcycle needs. From service parts to performance products and even motorcycle gear and apparel, Webike always seem to satisfy my needs in regards to availability and pricing.View Detail