7,113.23 INR
(12,906 JPY)
4 (3 Reviews)
Very Good
To manage the TorqueI use it to manage the torque on the important parts of the bolt. The drivetrain is especially severe, so I tighten the torque to prevent accidents, including wheel nuts.
It's luxurious and easy to use.
Reviews For SIGNET 3/8DR Torque Wrench 10-50NM From Other Webike User
Excellent
Cost performance It is a preeminent tool.Torque wrench is Pin gully, so I'm worried about which to buy.
I do not want to buy cheap clothes and regret it, (TOHNICHI) It is likely to choose a famous Manufacturer, but it is expensive.
SHIGNET was a reliable tool Manufacturer, so I chose this.
As a result, it was Large Correct!
We use two windows for the eyepatch.
First of all, Large unit (Every 5 to 10 N) The scale of the next small unit (0. Fits every 25 N). Therefore, you can set the scale without reading mistakes.
There is also Torque wrench which matches with only the graduation carved in the genus Gold, but it is hard to see due to the adjustment of light, and it seems to be wrong.
On that point, I think this product is easy to use and hard to make a mistake.
When the prescribed Torque is reached "Snap" You can check the sound and feel firmly. You can feel good quality and good use.
Since it is in Case of Plastic molded item, it can store without worry of breakage and loss. Translation (Please enter here for instructions manual also with chitin.
Although I have not confirmed the durability yet, I trust SHIGNET products there.View Detail
Average
Maybe it's okay, is not it?I was wondering where Torque wrench would be from before and what kind of Manufacturer I wanted to do, but I saw it as SIGNET for the time being. Although I used it immediately after arrival,
It is okay. After that, will you endure that it will not break, durability?View Detail
Most Viewed Reviews Of SIGNET Instrumentation Tools
Very Good
Good price and ease of use there.[How is it used?
I was originally using a Torque wrench made by SIGNET with a different measuring range, but I wanted to manage the smallest bolt of the Torque better, so I bought this Torque wrench.
Was the one you received as per Image?
The picture showed the same as the SIGNET Torque wrench I usually use, but when I saw the product I received, it was much smaller than I imagined;
How was your experience with it?
Since it is the same as the Torque wrench made by SIGNET that we had been using, the Torque settings and other ease-of-use did not change.
However, it is a little troublesome that the Socket cannot be replaced as it is, since it is usually 3/8 size. (Lol)
Prices are relatively low, but accuracy (%) The cosmetics are also moderately cost-effective because they are comparable to other companies' products at ±3.
[Points to note]
If you normally use 3/8Size, you will need a Conversion Adapter or 1/4 Socket because the Socket size is different.
How did it compare to other products?
NoneView Detail
Excellent
I've always wanted oneI've been wanting one since I haven't had a MONKEY Wrench for a long time I don't know how to use it very well Of course it can be used as a normal wrench, but it is also useful for holding down parts and so on Yes
There were two types of LargeSmall from SIGNET, but this is the Small Smallest one It is I thought this one was probably more frequently used for Motorcycles Dial movement, no wobble in the chin part, and the quality feeling was excellent I would like to use it for a long time from nowView Detail
Very Good
The quality of maintenance is improved just by having 1 pcI didn't have my own torque wrench until now, so I had to borrow or pre-marker I used to tighten the bolts by marking them with a "mark" and so on Tire and Brake detachment are now done so that you can manage the torque at any time I bought it to
Torque wrenches range from a variety of tool manufacturers to a variety of torque Wrench is out, but for now 10-100NM I thought that I could cover a certain amount of torque management if this product was available Tools Set was prepared with SIGNET, and Brand which seems to be comparatively reliable The fact that it was much cheaper than other companies was also a deciding factor
A checklist of tolerances made by the Manufacturer is included with the product, and the product description It is a torque value within dirt & plusmn; 3% If it is this high accuracy, the cost performance is good enough
The item unlocks Blue at the base of the Grip and makes the Grip any Torque Just turn it like that There is a window at the top of the lock that shows the torque value, so it's easy to set up
The lower limit is measured from 10NM, but to be honest, you can set a more detailed torque value up to 20NM The torque wrenches that can do this seem to be more reliable Especially for Engine, which is a place where detailed torque management is required, not so much for I do not recommend it When tightening Caliper bolts and Axle nuts, which require more torque than this, we recommend This one pc seems to work fine If it is used in combination with a more detailed torque wrench, depending on the use, good maintenance will also progress I think
However, it is not easy to fit in the toolbox, because the Grip part is thick I keep it in the exclusive Case separately But for those who do maintenance on the road, such as Circuit, it's not a problem You may find it difficult to carry aroundView Detail
Excellent
Cost performance It is a preeminent tool.Torque wrench is Pin gully, so I'm worried about which to buy.
I do not want to buy cheap clothes and regret it, (TOHNICHI) It is likely to choose a famous Manufacturer, but it is expensive.
SHIGNET was a reliable tool Manufacturer, so I chose this.
As a result, it was Large Correct!
We use two windows for the eyepatch.
First of all, Large unit (Every 5 to 10 N) The scale of the next small unit (0. Fits every 25 N). Therefore, you can set the scale without reading mistakes.
There is also Torque wrench which matches with only the graduation carved in the genus Gold, but it is hard to see due to the adjustment of light, and it seems to be wrong.
On that point, I think this product is easy to use and hard to make a mistake.
When the prescribed Torque is reached "Snap" You can check the sound and feel firmly. You can feel good quality and good use.
Since it is in Case of Plastic molded item, it can store without worry of breakage and loss. Translation (Please enter here for instructions manual also with chitin.
Although I have not confirmed the durability yet, I trust SHIGNET products there.View Detail
Other Reviews From Japanese Webike user
Excellent
Radipon handled in Mild?attachment
The CBR650R is mounted at the same position angle as the NORMAL.
However, when the handlebar was cut to the Left lock, it interfered with the interior cover next to the Meter, so the interior cover was cut away.
I also purchased a 45° angled banjo adapter for the mesh hose to accommodate the tension of the mesh hose.
・NORMAL (Reserve integrated horizontal master) Impressions of
No complaints on public roads. Familiar feel and very easy to handle.
However, when the brake is set to "hard brake," the rate of increase in braking force relative to the input seems to decrease, and the brake becomes more forceful.
Radipon (Reserve separate body portrait master) Impressions of
It was totally different from what I expected, my expectation was that it would feel like a Rear brake…
It is really a mild and easy-to-handle radipon.
On public roads, it feels like NORMAL! I wonder if it's because NORMAL is the same NISSIN?
But I felt the radipon effect from Breaking a little stronger, and
It can be hung up to a hard brake without effort.
I felt trust that this could stop.View Detail
Very Good
packtalk bold Attached MountI purchased this for use with multiple Helmets. 。
Mount included with the BOLD.
Microphone and speaker are not included and must be purchased separately.View Detail
Excellent
Grip replacementGrip that had been used for a long time was worn out and had to be replaced.
They are soft and dampen vibration.View Detail
Very Good
Works well in everyday life[How is it used?
Used to lick Screw loose.
Was the one you received as per Image?
As per Image.
How was your experience with it?
When used on a strongly tightened Screw, it can be safely and securely removed.
The licked Screw was removed.
It is also useful for DIY Screw removal.
[Points to note]
When used on a licked Screw, it is best to beat it in with a Hammer before use.View Detail
THE LARGEST
SHOP IN JAPAN
EXCLUSIVE COUPONS,
SALE, DEALS
FAST, RELIABLE
SHIPPING