Recently installed on my bike and tested. Constant spark and stable running. Very happy with the product. Recommended item
View Detail6,225.78 INR (10,750 JPY)
Delivery Information
This item is discontinued.
FITMENT
-
R100
77- OHC Flat 2 (2 valves)
-
R80
97- OHC Flat 2 (2 valves)
Product detail
Cord Diameter: 8mm
Number of cords: 2 pieces
**There is a specification of the stock plug cord which has no plug head terminal (4mm screw) as shown in the following figure for the spark plug.
Please check the spark plug head before installation.Since brass plug head terminal is attached to our power plug cord, be sure to attach the plug head terminal to the spark plug head with pliers or the like before replacing the plug cord..
Stock plug side 90°→120°(NG with cowl).
* The image is only for reference. The image shown may differ from the actual product.
It is not only the cable color that has changed, but also its performance
In addition to its presence as a part of the engine compartment, this product is a condensation of our relentless pursuit of performance and deep commitment.Ultra wants to form the performance that the tuner, the driver, and the ignition system demand.Ultra Red, Cobalt Blue, etc. are also called synonymous with silicone cords, and it can be said that the original technology, such as the method of distributing the original winding type noise suppressor to each terminal, is a manifestation of the commitment.Ultra will continue to create products that users can be proud to call "Best Buy".
The "Cobalt Blue Wire", which is the synonym of the Ultra Silicone plug cord, has been revived with further performance improvement.
1. Silicone cables, boots, and caps are all made of silicone rubber, which has excellent voltage and heat resistance characteristics, and are unified in the "cobalt blue" color that has made the Ultra Silicone Cord so popular.
The product lineup is limited to the most widely distributed part numbers of the current products and to 200 models that have the highest use rate of iridium plugs, etc., and the compatibility is being expanded sequentially.
3. The core wire of "Blue Point Power Plug Cord" is a copper core wire with the most excellent conductive characteristics. As in the conventional silicone series, the three-layer structure of silicone core, glass braid (sheath), and silicone rubber coating realizes a high withstand voltage of 150,000 V or more.
4. "Blue Point Power Plug Cords" adopt a low resistance value in accordance with the latest spark plug characteristics, and develop and adopt a wire wound resistor (noise suppressor) with a low resistance value of 0.5KΩ (1 / 2 or less than the conventional Ultra products) that is uniform for each cylinder. Although the resistance value is as low as 0.5kΩ, the wire-wound noise suppressor (resistor) cuts noise efficiently by the effect of L (inductance) component.In addition, by the method of arranging Ultra's original noise suppressor at the end of the plug cord, a uniform resistance value is realized for each cylinder, and by adopting a low resistance value of 0.5kΩ, the maximum spark energy is supplied without loss.
5. The low resistance value of 0.5kΩ per cylinder is the best match for plugs with R (register) and iridium plugs.
Main specifications
●Compatible models are being expanded to include specific sports model vehicles
●The outer diameter of the cable is 8mm only for the standard specification, and 7mm is available for some models only
●Spark plugs are compatible with iridium and platinum plugs with 5kΩ resistance
●When the vehicle is equipped with the stock ignition system, the resistance value of 0.6kΩ is adopted.
Points of Attention
* If there may be an instruction manual included, it will be written in Japanese.